See what our Experts say about this Redline Trailer Bearings Races Seals Caps

• Replacement Hub that Has Bearings L44649 and Bolt Pattern 5 on 4-1/2 inch
  The trailer hub part # 8-258-5UC1 that you referenced is an exact fit for the spindle you have on your trailer based on the bearing numbers you listed and the wheel bolt pattern. To jump up to a 3,500 lb axle would require more info from you. I'd need spring seat center to spring seat center plus hub face to hub face off your old axles. You have slipper springs which we can help with that as well. How long are the springs you have now?
  view full answer...
  
• Replacement Grease SEal for 2011 Zieman S-1 Trailer Hub
  If the existing grease seal on your trailer is in fact the NOK part # AB1990E that you referenced in your question, then I recommend using the Redline Grease Seal # 13194 as a replacement. This is a confirmed replacement for the NOK model and the difference in thickness you are noticing is simply due to the different manufacturers. This will not have an affect on the fit for the grease seal. The grease seals that are included in the Bearing Buddy Spindle Grease Seal Set # BB60005 are designed...
  view full answer...
• Trailer Grease Seal Recommendation to Replace Seal NOK AB1990E
  We can help you find the seal you need, but the part number you mentioned does not match anything we offer. Can you get me the inner and outer diameters of the seal? With that I can see what we have that matches.
  view full answer...
• Which Hubs Can Be Used to Replace the Hubs on a UFP H-1062-3
  The UFP hub that you've referenced isn't made any longer I don't believe, but we do have some options for you. From some previous customers, we've determined that the UFP H-1062-3 axle has a spindle that has # L44649 inner and outer bearings, and a grease seal that has a 1.979" OD and a 1.372" ID, like part # BB60005. You will need to choose the hub based off those bearings and the bolt pattern of the hub for your wheels, but the most likely one for a boat trailer of any size is a 5 on...
  view full answer...
• Grease Seal Recommendation for Dimensions 1.375 ID and 1.983 OD
  The grease seal you need is the part # 13194 which has an inner diameter of 1.372 inch and an outer diameter of 1.983 inch.
  view full answer...
• Replacement Hub, Bearing, and Grease Seal Kit for a UFP H-1062-3 Axle
  To find the correct hub for your axle you typically need to find the part numbers for your bearings and grease seal, or the diameter of the different spots that they sit on your spindle. We actually have had a customer who sent this information in to us so I am able to help you find exactly what you are needing. According to the customer, your UFP H-1062-3 axle has a spindle that has # L44649 inner and outer bearings, and a grease seal that has a 1.979" OD and a 1.372" ID, like part #...
  view full answer...
  
• Bearings, Races, and Grease Seal Recommendation for a 1995 Coleman Stoney Pop Up
  We have the bearings and seal that you would need, but they are not available in a kit. For bearings you would want the # L44649, for races part # L44610, and then for a seal you would need part # 13194. I attached a help article on replacing bearings, races, and seals on a trailer hub for you to check out as well.
  view full answer...
• Replacement Bearings, Races and Seal for 1993 Coleman Destiny Pop Up Camper
  I was able to locate the correct bearings, races and seal that correspond to the part numbers you provided in your question. For bearings you will need the part # L44649 and for races you will want # L44610. Then for the grease seal you will use part # 13194. You can also take a few quick measurements on the trailer spindle at various locations to verify that these are the correct replacement parts. I have attached an image that shows where these measurements should be taken. You are...
  view full answer...
  
• Replacement Grease Seal Recommendation for a BT-150A Hub
  Yes, based on the dimensions you listed the grease seal part # 13194 is the correct grease seal. It has an inner diameter of 1.372 inches and an outer diameter of 1.983 inches.
  view full answer...
• Replacement Trailer Hub Solution for H1062-3
  The UFP hub that you've referenced isn't made any longer I don't believe, but we do have some options for you. From some previous customers, we've determined that the UFP H-1062-3 axle has a spindle that has # L44649 inner and outer bearings, and a grease seal that has a 1.979" OD and a 1.372" ID You will need to choose the hub based off those bearings and the bolt pattern of the hub for your wheels, but the most likely option is the Dexter Trailer Idler Hub Assembly for 2,200-lb Axles...
  view full answer...
• Replacement For NOK AB1990E Grease Seal
  For a replacement of the NOK AB1990E grease seal you'll need the Grease Seal # 13194.
  view full answer...
• Does The Redline Grease Seal 13194 Have Markings Of TCM 13194 TM and a Spring On The Inside Lip
  I went out in the warehouse and pulled the Redline Grease Seal, part # 13194. It does have the markings on the inside of the seal that say TCM 13194 TM Taiwan and the number 11. It also has the spring around the inside lip. This seal will work for your boat trailer application.
  view full answer...
• Picking Out Grease Seal for 2000 Coleman Taos Pop Up
  To pick out a replacement grease seal you will need to measure the diameter of the spindle where the grease seal rides with a digital or dial caliper and then need to measure the hub bore where the current seal rides. With those two dimensions we can pick out the correct seal that you would need. I attached a link to a page that has all of the grease seals we carry. You will need to select your inner and outer diameter from the filters on the page and the correct seals will be listed.
  view full answer...
  
• Replacement Hub for UFP Hub H-1062-3
  The UFP hub that you've referenced isn't made any longer I don't believe, but we do have some options for you. From some previous customers, we've determined that the UFP H-1062-3 axle has a spindle that has # L44649 inner and outer bearings, and a grease seal that has a 1.979" OD and a 1.372" ID You will need to choose the hub based off those bearings and the bolt pattern of the hub for your wheels, but the most likely option is the Dexter Trailer Idler Hub Assembly for 2,200-lb Axles...
  view full answer...
• Is There a Grease Seal 13194
  Thank you for that info, and we do have that grease seal for you, at the following part number: - Grease Seal # 13194
  view full answer...
• Replacement Bearing Kit for 1988 EZ Loader Trailer with BT 150/151 Straight Spindle
  The correct replacement bearing kit for your 1988 EZ Loader trailer with the BT straight spindle is our part # BK1-150. This kit includes the inner/outer bearings to fit your 1-1/16" spindle shaft size, races, cotter pin and spindle washer. For the correct grease seal, you'll need to use # 13194, since the one included with the # BK1-150 kit is not the correct size.
  view full answer...
  
• Recommended Components To Add Electric Brakes To 1997 Coleman Destiny Pop-Up Camper
  It looks like you have really been spending some time putting together the components you need to install electric brakes on your camper. The # AKHD-545-2-2K hub and drum will work on your camper but you will need to replace the 10-9 seals included with the kit with # 13194 seals. The brakes you mentioned, # AKEBRK-2 will work great with the hub and drum. Since you said you have a 4-bolt brake flange the # BRKH7 brake mounting hardware will also work for you. The breakaway kit I...
  view full answer...
  
• Trailer Hub Grease Seal for UFP part number 07026
  Hey Jeff, based on the dimensions you took the only seal we offer that will work is the Bearing Buddy # BB60005. Actually the Bearing Buddy seal mentioned is for grease applications so that would be the lube type you'd need use.
  view full answer...
• Double Lip Redline Grease Seal # 13194 Dimensions
  Dimensions for Grease Seal # 13194 Width- 0.43" Outer Diameter- 1.983" Inner Diameter- 1.372"
  view full answer...
• Availability of Wheel Bearing Kit for Coleman Destiny Rio Grande Popup Camper
  We do not have a bearing kit that contains all the parts you need, but we do have the individual parts. For a grease seal you will want # 13194 For bearings you will want # L44649 (2x) For matching race you will want # L44610 (2x) These parts are for one wheel. I am including a link to a video that will show how to remove and reinstall trailer bearings, races, and seals. Also, a link to a page that will list the different bearing kits and the part numbers they use.
  view full answer...
• 1.375" x 1.983" x 0.46" Grease Seal Needed
  The closest option we currently offer with these dimensions would be Grease Seal # 13194, which has an 1.37" ID x 1.98" OD x 0.427". I measured this myself with a mechanical caliper to ensure the dimensions were correct.
  view full answer...
• Will Grease Seal 13194 Fit with Dexter Axle 8-258 Hub
  Yes, the Grease Seal # 13194 will fit just fine with a Dexter Axle 8-258 like part # 8-258-5UC1. I would verify fitment of this seal with your spindle by using a digital caliper like part # 301-17068. What you'll want to do is measure the diameter of your spindle where the grease seal rides. The seal # 13194 mentioned above has a 1.372" ID.
  view full answer...
• Hub/Drum and Seal Recommendation for a 1997 Coleman Fleetwood Bayport Camper
  The Trailer Hub and Drum part # 8-257-5UC3 would be the correct hub to use. You will need to order two of the Grease Seals part # 13194 to use on your spindle instead of the included # 10-9 seals. Other than that one small detail you would be good to go with these hubs as a replacement on your 1997 Coleman Fleetwood Bayport Camper.
  view full answer...
• Recommended Grease Seals For A 1994 Coleman Fleetwood Four Seasons Yosemite Pop Up Camper
  With your 1994 Coleman Fleetwood Four Seasons Yosemite having 10" wheels and looking to weight 1,850 pounds, from what I could find out, you will have either a 2,000 pound axle, or a 2,200 pound axle. This will mean you either have a spindle that uses the # L44649 bearings, or the # L44643 bearings. With that said, the correct seal will depend on which bearings you use, but there will only be 2 options so it's easy to choose from. I have the 2 options listed below: For # L44649 Bearings: TruRyde...
  view full answer...

Do you have a question about this Trailer Bearings Races Seals Cap?